Stylecraft X-Pro Black DLC Trimmer Blade 41 mm with "The One" Cutting Blade

Stylecraft X-Pro Black DLC Trimmer Blade with “The One” Cutting Blade

The X-Pro grinding process uses convex and hollow grinding for balanced precision and high sharpness. The fixed, 41 mm wide blade is suitable for large areas and bulk trimming and can be fully adjusted to zero-gap.

The Black Diamond Carbon blade is rust and corrosion-resistant, self-sharpening, and stays cooler and sharper for longer. The moving, beveled "The One" blade cuts closer for a smooth cut without pulling. Both blades fit most StyleCraft and GAMMA+ trimmers.

Highlights

• Long-lasting: Black DLC is rust-resistant, runs cooler, and stays sharper for longer
• Closer, cleaner lines: beveled blade without pulling or snagging
• Easy blade replacement: unscrew, swap, and adjust to zero-gap

Application & Tips

Installation: Loosen the two screws on the back, carefully remove the old blade, insert the new one, and tighten the screws again. Before switching on, check that the blades are correctly aligned; incorrect alignment can lead to injury.

Maintenance: Remove residue from the blade using the brush from the maintenance kit, optionally spray with disinfectant, apply 2–3 drops of oil directly to the blade, and wipe the device with a dry cloth. The blade guard helps to prevent scratches. Depending on usage, the manufacturer recommends changing the blade every 1 to 4 months.

Technical Data

• Fixed blade: 41 mm wide, Black Diamond Carbon DLC
• Moving blade: “The One”, beveled
• Grind: convex and hollow (X-Pro)